Jaw Crusher

Features of Jaw Crusher :

There are two types: coarse crushing and fine crushing, it will be the ideal equipment for primary crushing.Compare a KEFID jaw crusher with any other jaw crusher on the market. Immediately you’ll see this machine was built for demanding production, strength and a lifetime of dependability.

Kefid PE Jaw crusher  is of bend and press type. Moter will drive the belt and the belt wheel to force the mobile jaw to move up and down through eccentric draft, while the mobile jaw is lifting, angle between the toggle and the mobile jaw will become bigger, and the mobile jaw will move towards the fixed jaw; the jaw gears will throw materials to the crushing wall powerfully, and stones will be crushed to little pieces; while it goes down, the angle will become smaller, while pulled by the draw bar and spring, the mobile jaw will leave the fixed jaw and crushed materials will be discharged frome the outlet. While the motor is rotating continuously, the mobile jaw will carry out periodical press and discharging and implement mass production.

1.The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity;
2.It has a big crushing ratio and even grain shape.
3.The gasket type inlet size makes flexible adjustment posible, and it’s reliable, conveinent, and with a big adjustment range,which can greatly enhance the flexibility of the equipments.
4.The lubrication system is safe and reliable, and it’s quite convinient to change components and there will be less maintenance needed.
5.It has a simple structure, and is quite stable and low in operation cost.
6.The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system.

Technical Parameter Of Jaw Crusher:

Mm to inch conversion: 25.4millimeters=1 inch

Note: Any change of Jaw Crusher technical data shall not be advised additionally.